Another in the February 13-15 2021 blizzard/freezing rain series. After recording https://freesound.org/people/daveincamas/sounds/558683/ I grabbed the mic, bumped the gain a bit, and walked around to capture the ice …
February 16th, 2021
Binaural recording of a thick layer of ice melting off trees and falling into ice-covered snow. Occasionally huge amounts of ice are falling. Constant sound of ice falling. …
February 16th, 2021
Binaural recording of a thick layer of ice melting off trees and falling into ice-covered snow. Occasionally huge amounts of ice are falling. Constant sound of ice falling. …
February 16th, 2021
26 minute binaural recording of an intense winter windstorm/blizzard in a forest at midnight. The wind is absolutely howling through the trees, which are partially covered with ice …
February 15th, 2021
A short clip of a WW2 era airplane flyover and the natural reverb off of nearby buildings. There are no effects on this clip, this is the actual …
November 28th, 2019
Kind of a nightmarish version of a WW2 airplane flyover that I recorded a few years ago.
November 27th, 2019
From www.facebook.com/142FW:
"It's almost your birthday, America! We got you some flyovers for tomorrow, hope you enjoy!
10:45 a.m. Camas, Wash.
11:00 a.m. Ridgefield, Wash.
11:30 a.m. Manzanita, …
July 5th, 2019
Here's a bit of aural chaos - 13 minutes of a distant wood chipper being used during a wind storm.
Where I live we have quite a few …
January 10th, 2019
I am building a timber-frame arbor from 6"x6" and 6"x8" juniper timbers using traditional techniques. I did a test-fit of one of the mortise & tenon joints for …
January 2nd, 2019
I am building a timber-frame arbor from 6"x6" and 6"x8" juniper timbers using traditional techniques. I did a test-fit of one of the mortise & tenon joints for …
January 2nd, 2019
I am building a timber-frame arbor from 6"x6" and 6"x8" juniper timbers using traditional techniques. I did a test-fit of one of the mortise & tenon joints for …
January 2nd, 2019
I am building a timber-frame arbor from 6"x6" and 6"x8" juniper timbers using traditional techniques. I did a test-fit of one of the mortise & tenon joints for …
January 2nd, 2019
I am building a timber-frame arbor from 6"x6" and 6"x8" juniper timbers using traditional techniques. I did a test-fit of one of the mortise & tenon joints for …
January 2nd, 2019
I am building a timber-frame arbor from 6"x6" and 6"x8" juniper timbers using traditional techniques. I did a test-fit of one of the mortise & tenon joints for …
January 2nd, 2019
I am building a timber-frame arbor from 6"x6" and 6"x8" juniper timbers using traditional techniques. I did a test-fit of one of the mortise & tenon joints for …
January 2nd, 2019